Medium wall heat shrink tubing (DM-W), with adhesive (DM-WA)
2024/7/25 viewers
- BrandDEEM
- TypeDM-W / DM-WA
Introduction
Applications
Suitable for a variety of low voltage electrical and mechanical applications, where lighter weight and greater flexibility are important. Recommended to applications for light cable and wire harnesses that require waterproofing, protection, and sealing of connectors components within the tubing.
Features
High electrical insulation. High resistance to impact, abrasion and UV.
Provides excellent mechanical protection to cable joints and terminations.
3:1 shrink ratio allows it to fit over irregular shape and large connectors.
Various
Operating temperature : -55°C to +110°C
Shrink temperature: 120°C
Resistant to UV-radiation.
Standard colors: Black. Special color: Red
Packaging: Spools or length as standards according to product sizes.
Suitable for a variety of low voltage electrical and mechanical applications, where lighter weight and greater flexibility are important. Recommended to applications for light cable and wire harnesses that require waterproofing, protection, and sealing of connectors components within the tubing.
Features
High electrical insulation. High resistance to impact, abrasion and UV.
Provides excellent mechanical protection to cable joints and terminations.
3:1 shrink ratio allows it to fit over irregular shape and large connectors.
Various
Operating temperature : -55°C to +110°C
Shrink temperature: 120°C
Resistant to UV-radiation.
Standard colors: Black. Special color: Red
Packaging: Spools or length as standards according to product sizes.
Technical Data
Dimensions
| Property | Test Method | Typical Data |
| Tensile strength | ASTM D 2671 | ≥14MPa |
| Tensile strength after aging(158°C/168 hrs.) | ASTM D.2671 | ≥12 MPa |
| Elongation at break | ASTM D 2671 | ≥400% |
| Elongation at break after aging(158°C/168 hrs.) | ASTM D 2671 | ≥300% |
| Longitudinal shrinkage | UL224 | 0 to-10% |
| Density | ASTM D 792 | 1.05g/cm3 |
| Dielectric strength | IEC 243 | ≥20 kV/mm |
| Volume resistance | IEC 93 | ≥1014 Ω·cm |
| Eccentricity | ASTM D 2671 | <30% |
| Copper stability | ASTM D 2671 | Pass |
| Resistance to stress cracking | ASTM D 1693(50°℃) | No Cracking |
| Water absorption | ISO 62(23°C/14 days) | <0.15% |
| Thermoplastic adhesive for DM-WA | ||
| Water absorption | ISO 62 | <0.2% |
| Softening point | ASTM D E28 | 85℃ |
| Peel strength (PE) | DIN 30672 | 4N/cm |
| Copper stability | ASTM D 2671 | Non-corrosive |
| Resistance to fungus and decay | ISO 846 | Pass |
| Size | As Supplied(mm) | After Recovery (mm) |
Standard length
m |
||||
|
DM-W/DM-WA
(D)
|
Inside Diameter
Min. (D) |
Inside Diameter
Max. (d) |
Wall Thickness
Nominal. (t) |
||||
| 8/2 | 8 | 2 | 1.7 | 1.22 | |||
| 9/3 | 9 | 3 | 1.7 | 1.22 | |||
| 12/4 | 12 | 4 | 2.0 | 1.22 | |||
| 16/5 | 16 | 5 | 2.2 | 1.22 | |||
| 19/6 | 19 | 6 | 2.5 | 1.22 | |||
| 22/6 | 22 | 6 | 2.5 | 1.22 | |||
| 25/8 | 25 | 8 | 2.5 | 1.22 | |||
| 28/6 | 28 | 6 | 2.5 | 1.22 | |||
| 33/8 | 33 | 8 | 2.5 | 1.22 | |||
| 35/12 | 35 | 12 | 2.5 | 1.22 | |||
| 40/12 | 40 | 12 | 2.5 | 1.22 | |||
| 45/13 | 45 | 13 | 2.5 | 1.22 | |||
| 55/16 | 55 | 16 | 2.7 | 1.22 | |||
| 65/19 | 65 | 19 | 2.8 | 1.22 | |||
| 75/22 | 75 | 22 | 3.0 | 1.22 | |||
| 85/25 | 85 | 25 | 3.0 | 1.22 | |||
| 95/25 | 95 | 25 | 3.0 | 1.22 | |||
| 115/34 | 115 | 34 | 3.0 | 1.22 | |||
| 130/36 | 130 | 36 | 3.0 | 1.22 | |||
| 140/42 | 140 | 42 | 3.0 | 1.22 | |||
| 160/50 | 160 | 50 | 3.0 | 1.22 | |||
| 175/58 | 175 | 58 | 3.0 | 1.22 | |||
| 200/65 | 200 | 65 | 3.0 | 1.22 | |||
| 230/75 | 230 | 75 | 3.0 | 1.22 | |||
| 260/85 | 260 | 85 | 3.0 | 1.22 | |||
| 300/85 | 300 | 85 | 3.0 | 1.22 | |||
| 350/100 | 350 | 100 | 3.0 | 1.22 | |||
More Products
